Electrical

About This Product The Bell-End Elbow 3 in. 90-Degree is constructed from Schedule 40 conduit. The 3-inch, 90-Degree Standard Radius Bell End Elbow...

About This Product The Junction Box 4 in. x 4 in. x 2 in., like other surface-mounted enclosures without entrance hubs, allows multiple conduits to...

About This Product The Elbow Schedule 40 3 in. 45-Degree is a piece of PVC Schedule 40 conduit that has been heated and shaped to create a 45-degre...

About This Product This Octagon Box 4 in. x 2-1/8 in. Deep with 1/2 in. and 3/4 in. Knockouts comes with 9 knockouts available in both 1/2-inch and...

About This Product JM Eagle provides a full range of Electrical Conduit and Power Duct pipes, including Schedule 40 and 80 Conduit, Encased and Dir...

About This Product Switch and outlet boxes, along with all their accessories, are safeguarded against rust and corrosion through zinc galvanization...

About This Product Attach the Service Entrance (SE) Cap Standard Fitting 2-1/2 in. to an overhead service entrance. It can be installed on the top ...

About This Product The Ceiling Box Cover White Non-Metallic Round Blank 4 in. is intended to conceal ceiling boxes when they are not being utilized...

About This Product This Steel Utility Box 4 in. is ideal for indoor electrical applications. Constructed from steel for long-lasting use, it includ...

About This Product This Rigid Conduit Strap 2-1/2 in. 2-Hole fastens EMT, IMC, or galvanized rigid conduit to wood or masonry. The steel with a zin...

About This Product Utilize the Rigid Conduit Nipple 2 in. x 5 in. to join two steel outlet boxes or to lengthen threaded rigid or IMC conduit. This...

About This Product Wiring for electrical devices is securely housed and shielded within the Steel Square Box 4 in. with SV Bracket. This box can be...

About This Product These Rigid Conduit Reducing Washers 2 in. x 3/4 in. (4-Pack) are designed to decrease the diameter of knockouts in metal enclos...

About This Product The Steel Metallic Box Cover 4 in. Square for Double Duplex is designed to close off a 4-inch box, safeguarding the wiring eleme...

About This Product Utilize the Rigid Conduit Nipple 2 in. x 3 in. Male to connect outlet boxes or other metal enclosures, or to lengthen a section ...

About This Product Alflex RWA Flexible Conduit 2 in. x 25 ft is appropriate for power and lighting branch circuit conductors and cables used to con...

About This Product Protect GFCI outlets using the Steel Metallic Box Cover 4 in. Square for 2 GFCI Receptacles. Ideal for indoor use, it is constru...

About This Product The Rigid Metal Conduit 2 in. x 10 ft is a galvanized steel pathway designed to safeguard and direct conductors and cables. This...

About This Product Attach the Mud Ring Square 4 in. to give an electrical box an additional 1/2 inch of height for flush covering. This mud ring is...

About This Product Enhance your electrical conduit system with conduit bodies. The Type-LB Conduit Body 2 in. is made from sturdy PVC to provide st...

About This Product The Standard Fitting Rigid Conduit Straps 2 in. 2-Hole (2-Pack) are designed to secure conduit to wood, masonry or similar surf...

About This Product The Metal Box 4 in. Square with Bracket is mounted to a wall stud on the side to accommodate electrical switch and receptacle wi...

About This Product For a reliable EMT installation, opt for the Standard Fitting Electrical Metallic Tube (EMT) Straps 2 in. 2-Hole (2-Pack). These...

About This Product Safeguard and organize the cables for your installed electrical equipment using the Metal Box 4 in. Square with 1/2 in. and 3/4 ...