ABS Pipes & Fittings

ABS Pipes & Fittings: What You Need to Know

ABS pipes and fittings, also called Acrylonitrile Butadiene Styrene piping components, are widely used in plumbing and drainage systems due to their lightweight, non-corrosive, and impact-resistant properties. These fittings are available in diameters ranging from 1-1/2 in. to 6 in., including multi-port and cross-size connections. Available lengths include 2 ft. and 10 ft. options, while angle-based features such as 22.5-degree, 45-degree, 60-degree, and 90-degree fittings are offered for precise directional adjustments in the system.

Types:

• Adapter Cleanout: Connects to cleanout plugs to allow easy maintenance access in the pipeline. Common in systems requiring routine inspection or cleaning.
• Adapter Female: Provides a female-end connection to join with male-threaded components. Used to link fixtures or transition lines.
• Adapter Male: Features male threading to connect with female fittings. Helps bridge pipe sections or connect to valves and outlets.
• Air Admittance Vent: Regulates airflow in drainage systems to prevent pressure buildup. Used as a venting solution where traditional venting isn’t possible.
• Cap: Seals off the end of a pipe to stop flow or terminate a line. Often used during testing, repair, or future expansion.
• Cleanout 2-Way: Offers bidirectional access to the pipe for cleaning or clearing clogs. Useful for long runs and branch points.
• Cleanout Plug: Screws into a cleanout fitting to close off access points. Easily removed during system maintenance.
• Cleanout Tee: Combines a standard tee with a cleanout port for easy access. Used where branch lines meet vertical stacks.
• Closet Bend: Connects toilets to drain lines at the correct angle. Ensures smooth waste flow and proper venting.
• Coupling: Connects two straight pipe sections in a continuous run. Provides a secure, leak-free joint.
• Elbow Fitting: Changes the direction of pipe flow, typically at 45° or 90°. Used in corners and tight installation spaces.
• Fixture Fitting: Joins pipes to plumbing fixtures like sinks or tubs. Designed for tight seals in exposed areas.
• Flush Bushing: Reduces pipe size by fitting inside a hub. Used when transitioning to a smaller diameter in a compact layout.
• Long Sweep: Provides a smooth directional change with minimal resistance. Preferred for better flow in horizontal-to-vertical transitions.
• P-Trap: Holds a water barrier to block sewer gases. Common under sinks, tubs, and floor drains.
• Pipe: Straight pipe sections used to transport water or waste. Available in various diameters and lengths.
• Pipe Adapter: Connects two different pipe types or sizes. Used for adapting between materials or fittings.
• Pipe Test: Seals sections of pipe for pressure or leak testing. Removed after the test is complete.
• Reducer/Increaser: Adjusts pipe size up or down between fittings. Maintains consistent flow while switching diameters.
• Riser Pipe: Extends vertically from a line to fixtures or upper levels. Often used for water supply or drain venting.
• Sanitary Tee: Allows horizontal branches to connect to vertical stacks with proper flow. Prevents backflow in drainage systems.
• Tee Wye: Splits or combines flow at a 45° angle for smoother transitions. Ideal for systems needing gradual redirection.
• Trap Adapter: Links a P-trap to other piping. Provides compatibility between the trap and wall or floor plumbing.
• Wye Fitting: Creates a branch line at a 45° angle from the main run. Maintains flow direction while minimizing resistance.

Application:

• Hub-Based Connections: Hub x Hub, Hub x Slip, and Hub x Hub x Hub are standard press-fit connections used for quick and secure installations. These configurations are ideal for standard drainage systems where ease of use and tight seals are critical.
• Spigot-Based Connections: Hub x Spigot, Spigot x Hub, Spigot x FPT, Spigot x Slip, and Slip-Joint use spigot ends for insertion into hub fittings. These offer flexible joining options, especially in confined spaces or mixed systems.
• Threaded & Specialty Joints: Hub x FPT, Hub x MPT, and Weld Joint allow direct threaded connections or solvent welds for permanent seals. These applications are ideal for precision fittings, fixture hookups, or high-durability joints.
• Multi-Inlet Configurations: All Hub, Lowheel Inlet, and Side Inlet provide additional access or multiple connection points in one fitting. These are often used in systems with complex layouts or multi-fixture tie-ins.

At Supply Ontime, we offer reliable materials designed to meet your project’s needs. With same-day delivery across the Greater Los Angeles area, we make it easy to keep your projects on schedule. Order ABS Pipes & Fittings now and get them delivered today!