Post Brackets

The SDS screws provide a lower profile than standard through bolts. Certified welds ensure strength and loading confidence, and uplift loads are in...

The SDS screws provide a lower profile than standard through bolts. Certified welds ensure strength and loading confidence, and uplift loads are in...

The SDS screws provide a lower profile than standard through bolts. Certified welds ensure strength and loading confidence, and uplift loads are in...

This column cap uses Simpson Strong-Tie Strong-Drive SDS screws for faster installation and provides a greater net section area of the column compa...

This column base uses Strong-Drive screws for fast installation, reduced reveal, and high capacity. It provides a 1-inch standoff between the post ...

Designed to meet stringent building codes for seismic or high-wind events, this post base is slotted for adjustability and features a 1-inch stando...

This column base is shipped with the base plate assembled and provides a 1-inch standoff clearance required by code. The standoff base reduces the ...

Designed to meet stringent building codes for seismic or high-wind events, this post base is slotted for adjustability and features a 1-inch stando...

This column base is shipped with the base plate assembled and provides a 1-inch standoff clearance required by code. The standoff base reduces the ...

This column base is shipped with the base plate assembled and provides a 1-inch standoff clearance required by code. The standoff base reduces the ...

This product can be used for various applications where quick-to-install posts are needed, including single 2x studs and mailbox posts. Made from 1...

This column base offers increased uplift resistance for wind or seismic loading. The bolt hole locations meet code-required spacing for optimal cap...

This product attaches a post to existing concrete for decks, patio covers, and other top-supported structures. It features a 1-inch standoff to hel...

The ZMAX finish is standard to meet exposure conditions in many environments, offering easy installation with 0.148 in. x 3 in. nails or Strong-Dri...

This product attaches a post to existing concrete for decks, patio covers, and other top-supported structures. It features a 1-inch standoff to hel...

This product complements the Outdoor Accents APB decorative post base and is designed for use with nominal 6x and actual 6x lumber. The width is 5 ...

The ZMAX finish is standard to meet exposure conditions in many environments. It offers easy installation with 0.148 in. x 3 in. nails or Strong-Dr...

This post base offers added standoff adjustability for various applications and should be installed in wet concrete. It provides the code-required ...

Designed to meet stringent building codes for seismic or high-wind events, this post base is slotted for adjustability and features a 1-inch stando...

This post base embeds in wet concrete after the pour and installs flush with the concrete surface. An embossment in the seat of the base provides i...

This post base is easy to install in concrete with 1/2-inch diameter anchors. Suitable for nominal 4x4 posts, it is made from 12-gauge steel with a...

This post base embeds in wet concrete after the pour and installs flush with the concrete surface. An embossment in the seat of the base provides i...

This product allows for easy repair of rotted or damaged 4x4 wood posts installed in concrete or dirt, reinforcing weakened wood posts without need...

This post base embeds in wet concrete after the pour and installs flush with the concrete surface. An embossment in the seat of the base provides i...