Conduit & Fittings

About This Product Attach EMT conduit to a steel outlet box or enclosure when a wide radius is needed using a 90° Large Radius EMT Elbow. This elbo...

About This Product 3/4 inch 2-Hole Straps (50-Pack) assist in securing conduit when extra load support is necessary. These zinc-coated straps can b...

About This Product Utilize the 3/4 in. 1-Hole Conduit Straps (4-Pack) to provide support for EMT conduits when there is a need for increased load-b...

About This Product Utilize these 3/4 in. EMT Compression Couplings (5-Pack) to connect sections of EMT conduit. They feature compression rings alon...

About This Product Our Male Terminal Adapter serves as a connector to transition from a spigot end PVC conduit to a threaded metal or PVC plastic f...

About This Product The 3/4 inch ACC Non-Metallic Strain Relief Cord Connector works with galvanized rigid conduit and is designed for both indoor a...

About This Product Non-Metallic Connector 3/4 in. liquid-tight connector. These fittings help you save both time and money. They provide the quicke...

About This Product This 3/4 inch 90° Schedule 40 Elbow allows for a turn in a run of rigid non-metallic conduit (RNC) without causing the electrica...

About This Product The 3/4 inch 90-degree Connector is useful for connecting flexible metallic conduit and metal-clad cable at an angle to an outle...

About This Product To form a corner in EMT conduit, use the 90 degree EMT Elbow. This elbow makes wire pulling simple. It is galvanized and suitabl...

About This Product A segment of PVC Schedule 40 conduit that has been heated and bent to achieve a 90° directional change in a conduit run. One end...

About This Product A segment of PVC Sch. 40 conduit that has been heated and bent to create a 45° directional change in a conduit run. One end feat...

About This Product This 3/4 inch, two-part 90-degree liquid-tight connector is made from nylon, which is resistant to saltwater, mild acids, gasoli...

About This Product The 3/4 in. 2-Hole Conduit Straps (10-Pack) are intended to fasten conduit to wood, masonry, or comparable surfaces. These strap...

About This Product JM Eagle provides a full range of Electrical Conduit and Power Duct pipes, including Schedule 40 and 80 Conduit, Encased and Dir...

About This Product The 3-inch by 10-foot Intermediate Metal Conduit is a galvanized steel raceway. A thread protector is located at one end of this...

About This Product The 3-inch 2-Hole Conduit Strap is crafted to fasten rigid, IMC, or EMT conduit to wood, masonry, or comparable surfaces. This s...

About This Product Constructed from rigid PVC. This connector is commonly utilized to transition threaded metal conduit to PVC conduit. It can also...

About This Product The 3-inch PVC Conduit Clamp is a durable clamp intended for PVC conduit applications. This clamp permits PVC conduit to expand ...

About This Product The elbow is constructed from Schedule 40 conduit. The 3-inch, 90-Degree Standard Radius Bell End Elbow is intended to assist in...

About This Product A piece of PVC Schedule 40 conduit that has been heated and shaped to create a 45-degree turn in a conduit installation. One end...

About This Product JM Eagle provides a full range of Electrical Conduit and Power Duct pipes, including Schedule 40 and 80 Conduit, Encased and Dir...

About This Product Attach the 2-1/2 in. Service Entrance Cap to an overhead service entrance. It can be installed on the top of EMT, Rigid, or IMC ...

About This Product This 2-1/2 inch 2-Hole Rigid Conduit Strap fastens EMT, IMC, or galvanized rigid conduit to wood or masonry. The steel with a zi...