Circuit Breaker Amp Pole Circuit BR 2-15 Single Tandem Non-CTL

Circuit breakers serve to safeguard the wiring in your home from excessive heat (commonly called an overload) and fault currents (often referred to as short circuits). Tandem breakers are useful for adding circuits to a fully loaded panel and can sometimes help minimize the physical dimensions of the load center. This is a non-circuit limiting breaker. The tandem series of breakers is designed for replacement in load centers manufactured before 1968.

• The main purpose of a circuit breaker is to shield the wiring from overheating (overload) and fault currents (short circuit).

• Amperage - (2) 15 Amp

• 1 in. plug-on circuit breaker

• Trips to the center position - requires turning off and then back on

• Interrupt rating - 10 kAIC

• Voltage rating is 120/240-Volt

• Wire size - #14-4 AWG Cu/Al at 60 degrees C or 75 degrees C

• Duplex circuit breakers are intended as replacement breakers for enclosures produced before 1968 with un-notched stabs.