Conduit & Fittings

About This Product This 3/4 inch, two-part 90-degree liquid-tight connector is made from nylon, which is resistant to saltwater, mild acids, gasoli...

About This Product Attach the 2-1/2 in. Service Entrance Cap to an overhead service entrance. It can be installed on the top of EMT, Rigid, or IMC ...

About This Product The 2-inch 90-Degree Bell-End Elbow is crafted from schedule 40 conduit. This bell end elbow is intended to assist with a 90-deg...

About This Product The 2-inch Plastic Insulated Bushings (4-Pack) are crafted to safeguard wires within threaded rigid or IMC conduits. Constructed...

About This Product The 2-inch, 90-degree conduit elbow is designed for creating a 90-degree turn when setting up rigid or intermediate metal condui...

About This Product Install the 2-inch Non-Metallic Sheathed Cable Clamp Connectors when connecting non-metallic sheathed cables and flexible cords ...

About This Product Attach non-metallic sheathed cable to a metal enclosure using non-metallic cable connectors, designed to fit a standard 1/2 in. ...

About This Product The 1/4 inch One-Hole Ground Cable Straps (pack of 50) are useful for attaching bare solid wire to a work surface. They resist c...

About This Product 1/2 in. Snap-In Bushings (10-Pack) will assist you in preventing harm to non-metallic cable when inserting it through metal stud...

About This Product The 1/2 inch Watertight Conduit Connector is intended for both indoor and outdoor service-entrance uses. This connector works wi...

About This Product The 1/2 inch Service Entrance Ell comes with a cover and gasket, intended to provide access to the inside of a raceway for tasks...

About This Product This 1/2 inch connector provides a liquid- and oil-tight seal due to its sealing ring and internal grommet with gripping fingers...

About This Product The 1/2 in. Cable Connectors (5-Pack) link non-metallic sheathed cables to metal enclosures. Constructed from polypropylene plas...

About This Product Arlington's 1/2 inch Non-Metallic Liquid-Tight Push-On Connector is made from UV-rated plastic, ensuring durability for outdoor ...

About This Product Non-Metallic Box Connectors (50-Pack) can be utilized with either 1 or 2 NM sheathed cables (refer to the image above for compat...

About This Product 1/2 in. Non-Metallic Box Connectors (Pack of 10) can be utilized with 1 or 2 NM sheathed cables. They fit into 1/2 in. holes. Co...

About This Product 1/2 inch Low-Profile Strain Relief Cord Connector, made from non-metallic materials, is both liquid-tight and oil-tight, and com...

About This Product 1/2 inch Electrical Non-Metallic Tubing Snap-On Male Adapter screws into threaded hubs and fits through knockouts. It is constru...

About This Product The 1/2 in. Electrical Non-Metallic Tubing (ENT) Coupling for connecting pieces of electrical non-metallic tubing (ENT) togethe...

About This Product The 1/2 in. ACC Non-Metallic Strain Relief Cord Connector is designed for both indoor and outdoor use and has safety certificati...

About This Product Save both time and money with fittings. They provide the quickest and simplest installation for liquid-tight conduit. The connec...

About This Product This 1/2 inch, 2-part straight liquid-tight connector is made from nylon, which is resistant to salt water, mild acids, gasoline...

About This Product The 1-1/4 inch Service Entrance Ell is appropriate for both indoor and outdoor use. Crafted from die-cast aluminum for durabilit...

About This Product With the 1-1/4 in. Twin-Screw Clamp Connector, you can connect non-metallic sheathed cable or flexible cord to a metal enclosure...